LUXAPOOL Epoxy Primer Sealer

LUXAPOOL Epoxy Primer-Sealer is designed for use as the first coat for cement render and concrete pools having ‘powdery surfaces’, or as the first coat for marblesheen and small pebble surfaces. It penetrates and seals such surfaces in order to provide a sound and tighly bound surface for following epoxy colour coats. Epoxy Primer-Sealer Hardener is included with your order of Epoxy Primer-Sealer.

LUXAPOOL Epoxy Primer Sealer is an integral part of the LUXAPOOL Epoxy Pool System where assurance of optimum adhesion is sought for many pool surfaces.

Is a long proven solvent based, high solids, two part epoxy, designed specially to eliminate surface pin holes and the ingress of water soluble salts which could lead to the blistering, flaking and peeling of the finish coat.

Is recommended as the first coat of the LUXAPOOL Epoxy Pool System for many pool surfaces including new concrete, marblesheen, and old rendered surfaces.

Please Note: If pool has been previously painted in Chlorinated Rubber, an Epoxy CANNOT be applied over the top.

Hardener:

• The Hardener for LUXAPOOL Epoxy Primer-Sealer is suitable across temperature ranges of 12 > 30^oC.

Use Areas

As the first coat in the LUXAPOOL Epoxy Pool System for selective use in:

• Swimming pools.
• Water tanks.
• Fish ponds.
• Aquaculture ponds.

Benefits

• Medium solids primer with good surface wetting.
• Excellent adhesion to sound, but porous concrete, render and marblesheen surfaces.
• Easy mix ratio via pre-pack quantities.

Available Sizes

4L kit.

(Kits include 2-Pack Epoxy – Part A and Hardener – Part B)

Coverage

Approx. 25-30m² per 4L kit, per coat.

Downloads

Manual